About 3 Axis USB Vibration Data Logger
What is our data logger collection?
A data logger is an electronic device that records data over time with a built-in sensor or external instrument upon application. One of the primary benefits is to collect data automatically on a 24 hours basis. Once activated, it is typically deployed and left unattended to measure and record information for the duration of the monitoring period. This allows a comprehensive and accurate picture of Data Logger circumstance being monitored such as temperature, voltage, vibration…etc.
What is the 3 Axis USB Vibration Data Logger?
This USB Vibration Data Logger can measure and record under the range from -16g to +16g, and record tri-axial acceleration value of gravity. It can also be used to detect tilt, shock, vibration and other motion activities. The operation can be either commenced by triggering the push button on any basis or nominate the specific time range after parameter preset through provided software. All recorded data can then be downloaded on completion for review and analysis. On the other hand, it can act as a vibration monitoring system while hooking up the logger with software. All results will be displayed on a screen in real time. With massive data storage capacity (maximum of 327,600 data set) and calibration function, it is perfectly suited for a variety of applications in the field of industrial, medical, communication, consumer electronics and automotive industries.
- Please check the following features:
- Record 3 axis load force acceleration value
- Real time FFT for frequency analysis
- Measure dynamic and static acceleration
- Maximum of 327,600 data recording
- Option of manual (remote) operation or specific time recording mode
- Complimentary software for parameter setup, analysis & report generation capabilities
- Calibration function Data Logger
- Green & Red LED signal indication
- Magnet or screw type mounting pedestal
- USB interface for data downloading
Please feel free to contact us if you have any data logger enquiries via info@instrumentdevices.com.au or 1300 788 213.